BTA BMC Timemachine 01 Disc Slim

Suitable BTA slim for the BMC Time Machine 01 Disc.

The plate is screwed under the armrests.

This BTA plate, along with the Slim Riser, is designed to install a bottle in the cockpit. Optionally, a computer can be installed with the TachoStick, and two additional bottles can be installed with the Whoppa.

Contains:
TRI-C Flex Riser Slim
TRI-C Carbon Plate
+ Spacer for the bottle on riser
+ Metal slide to move riser

If speedometer should be installed:
Optional: TachoFlexStick: CarbonStick to mount the computer on the riser
+ Mount for Garmin / Wahoo
* Spacer for the mount

Optional: Whoppa for 2 bottles at the same time.

Gorilla bottle holders shown NOT included.

The riser is 60mm high at 0 degree angle.
Depending on the angle, the minimum and maximum height changes, so a 20 degree riser is lower at the front and higher at the rear.

If the cockpit is tilted at 15 degrees, a riser angle of 15 degrees will compensate for this, keeping the bottle and computer horizontal. We tend to recommend choosing exactly this angle (cockpit angle = riser angle).

Additionally, there is the option to order our Whoppa directly, so that you can ride 2 bottles on the riser at the same time.
This BTA combination is also available as a single product or the Whoppa individually for reordering or similar.

This Riser Flex Set is used to carry a bottle between your arms as needed. You can mount a bottle and a bike computer in front of the bottle (you can also select the TachoFlexStick for this). The metal slide allows the riser to be mounted further back or forward to either ensure an ergonomic position or, depending on the bike, to comply with the rules. You can also vary the height of the bottle cage. This allows you to mount a low riser as a base, which will ensure safety and aerodynamics according to DTU and Ironman rules. If your arms grow due to intensive training or clothing, or if the riser is a little too low, the spacers under the bottle can create more space. You can also use the TachoFlexStick and spacer to raise the speedometer and attach it further forward, so that even very large speedometers fit securely on the riser in front of the bottle cage.

If the cockpit is tilted at 15 degrees, a riser angle of 15 degrees will compensate for this, ensuring the bottle and speedometer are horizontal. We tend to recommend choosing exactly this angle (cockpit angle = riser angle).

Delivery time: approx. 3 to 7 working days (international delivery time additional 1 to 6 days)