Canyon Speedmax four bottle set

Double bottle cage behind the saddle and double bottle cage between the arms as a set. Suitable for Speedmax CFR & SLX. Our Raketa adapter plate and our Aerofin, along with the matching riser and Whoppa as a BTA, are bundled in one package!

INCLUDED IN THE SET:
Carbon adapter plate (Raketa)
AeroFin (aluminum and carbon)
Canyon BTA (Riser)
Cockpit Whoppa (2 bottle adapter)
Matching screws

Gorilla bottle holders and bottles shown not included!

Rocket: This carbon plate allows two bottles to be mounted side by side behind the saddle. The plate can be screwed onto existing mounts, including special mounts like those for the Canyon Speedmax, but of course also onto standard mounts for most bicycles.

AeroFin:

Aerodynamic holder for attaching a water bottle behind the saddle. The holder is made of aluminum and is optimized in shape to weigh only 150 grams despite its high stability. The open side is closed with a carbon cap. The holder can be attached to any seat post with two holes spaced 64mm or 65mm apart. The four holes allow for two different positions, with the bottle cage sitting either at the top of the saddle or slightly below the saddle.

This mount allows for maximum aerodynamic placement behind the saddle. The raised position also makes it easier to grip the bottle.

BTA Riser from TRI-C for the CanyonSpeedmax with monoextension (CFR / SLX).
Speedometer and drinking bottle in the cockpit

A riser in the standard height of 60mm:
+ 10mm & 20mm spacers for risers
+ Mount for Garmin / Wahoo
+ SpacerMount, for large speedometers or needs

Pictured Garmin and Gorilla bottle holder NOT included.

Not compatible with the “Canyon Speedmax Armrest Upgrade Kit” from Canyon.

The riser is 60mm high in the middle, depending on the angle the front end is less than 60mm high and the rear end is more than 60mm high.

Also fits the Canyon Gear Groove!

Offers the option of attaching a bottle cage to the Canyon Speedmax monotube extension. Additionally, a Garmin or Wahoo bike computer and a magnetic drinking tube holder can be attached to the riser. The riser can be mounted in four positions. This allows the bottle cage to be positioned exactly where you want it, either closer to your hands or closer to your upper body.

This riser flex set can be used primarily to mount the BTA solution as needed. A bottle can be mounted and a bike computer in front of the bottle. The riser has a standard height of 60mm. This is high enough to allow your arms to fit under the bottle cage. The included spacers allow for a total height increase of up to 30mm, bringing the total height to 80mm for larger arms or for aerodynamic advantages. This is likely close to the regulatory height. Feel free to contact us with any special requests.

If the cockpit is tilted at 15 degrees, a riser angle of 15 degrees will compensate for this, ensuring the bottle and speedometer are horizontal. We tend to recommend choosing exactly this angle (cockpit angle = riser angle).

If you have any questions, please feel free to contact us via chat or on Instagram. You can also find application videos about this riser and its compliance on Instagram and YouTube.

To install, first tighten the adapter to the threads provided by Canyon using a torque of 4 Nm. The riser is then attached to this interface. All screws required for installation, as well as the magnetic hose holder, are included in the scope of delivery.

This is a TRI-C brand product and not an original Canyon component

INCLUDED IN THE SET:
Carbon adapter plate (Raketa)
AeroFin (aluminum and carbon)
Canyon BTA (Riser)
Cockpit Whoppa (2 bottle adapter)
Matching screws

Bottle holders shown are not included!